欢迎光临,东莞市天雄激光科技有限公司!
东莞市天雄激光科技有限公司
天雄激光专业自动化激光设备制造商
激光打标机专家咨询
13433631101
天雄激光行业资讯
全国服务热线
400-829-6628

联系人:唐先生

手机:13433631101

电话:0769-88038887

传真:0769-27200852

邮编:523867

邮箱:13433631101@163.com

地址:东莞市长安镇上沙社区北横街10号明和商务楼5楼508

东莞长安激光打标机操作中英对照

作者:天雄激光  来源:未知  时间:2019-02-25

光纤激光器近年来成为激光物理研究的一个热门,它被一致认为是有可能全面替代固体激光器的新一代产品。光纤激光器是指用掺稀土元素玻璃光纤作为增益介质的激光器,光纤激光器可在光纤放大器的基础上开发出来:在泵浦光的作用下光纤内极易形成高功率密度,造成激光工作物质的激光能级“粒子数反转”,当适当加入正反馈回路(构成谐振腔)便可形成激光振荡输出。光纤激光打标机是利用激光束在各种不同的物质表面打上永久的标记。打标的效应是通过表层物质的蒸发露出深层物质,或者是通过光能导致表层物质的化学物理变化而"刻"出痕迹,或者是通过光能烧掉部分物质,显出所需刻蚀的图案、文字、条形码等各类图形。
Fiber laser has become a hot topic in laser physics research in recent years. It is considered as a new generation product that may replace solid state laser. Fiber laser is refers to the element with rare earth doped glass fiber as gain medium laser, fiber laser can be developed on the basis of the optical fiber amplifier: within the optical fiber under the action of the pump are high power density, causing the laser work material laser level "population inversion", as appropriate to join the positive feedback loop (a cavity) can form a laser oscillation output. Optical fiber laser marking machine is the use of laser beams in a variety of different material on the surface marked permanently. Marking effect is through the evaporation of surface material to reveal the deep material, or through light can lead to chemical and physical changes in the surface material and "cut" marks, or through light can burn off part of the material, showing the need to etch the pattern, text, bar code and other graphics.
东莞长安激光打标机中英对照
东莞长安激光打标机是利用激光束在各种不同的物质表面打上永久的标记。打标的效应是通过表层物质的蒸发露出深层物质,或者是通过光能导致表层物质的化学物理变化而"刻"出痕迹,或者是通过光能烧掉部分物质,显出所需刻蚀的图案、文字、条形码等各类图形
Optical fiber laser marking machine is the use of laser beams in a variety of different material on the surface marked permanently. Marking effect is through the evaporation of surface material to reveal the deep material, or through light can lead to chemical and physical changes in the surface material and "cut" marks, or through light can burn off part of the material, showing the need to etch the pattern, text, bar code and other graphics

东莞长安激光打标机是指该款打标机使用的是光纤激光器,光纤激光器具有体积小(无水冷装置,使用风冷)、光束质量好(基模)、免维护等特点。
Fiber laser marking machine refers to the use of this marking machine is fiber laser, fiber laser has a small volume (no water cooling device, the use of air cooling), good beam quality (basic mode), maintenant-free and other characteristics.
东莞长安激光打标机中英对照
东莞长安激光打标机主要由激光器、振镜头、打标卡三部分组成,采用光纤激光器生产激光的打标机,光束质量好,其输出中心为1064nm,整机寿命在10万小时左右,相对于其他类型激光打标器寿命更长,电光转换效率为28%以上,相对于其他类型激光打标机2%-10%的转换效率优势很大,在节能环保等方面性能卓著。Mainly consists of laser, lens, marking card of three parts, using production laser marking machine, fiber laser beam quality good, the output center is 1064 nm, the whole life in 100000 hours, compared with other types of laser marking machine live longer, electro-optic conversion efficiency of 28% above, relative to other types of laser marking machine conversion efficiency of 2% 10% of the huge advantage, outstanding performance in energy conservation and environmental protection, etc.

东莞长安激光打标机设备特点
1、可对多种金属、非金属材料进行加工。尤其对高硬度、高熔点、脆性材料进行标记更显优势。
2、属于非接触加工、不损坏产品、无刀具磨损、标记质量好。
3、激光束细、加工材料消耗很小、加工热影响区小。
4、加工效率高、采用计算机控制、易于实现自动化。
1, can be a variety of metal, non-metallic materials for processing. Especially for high hardness, high melting point, brittle material marking more obvious advantages.
2, belongs to the non-contact processing, does not damage the product, no tool wear, marking good quality.
3. The laser beam is fine, the processing material consumption is small, and the processing heat influence area is small.
4, high processing efficiency, the use of computer control, easy to achieve automation.
 
在线客服
在线客服①
在线客服②
扫一扫 微信公众号
扫一扫 手机二维码